Construction steps of gabion net retaining wall
Published:
2020-11-30
Gabion mesh retaining wall, like many wire mesh products, has obvious effects on river management. So do you know the construction steps of the gabion mesh retaining wall? Let's follow the editor to understand!
Gabion mesh retaining wall, like many wire mesh products, has obvious effects on river management. So do you know the construction steps of the gabion mesh retaining wall? Let's follow the editor to understand!
Preparation before construction, including custom-made gabion cage nets, net pads and corresponding materials and inspections, excavation of retaining wall foundation pits. After passing the inspection, the control supply should be set every 10 meters to control the axis, bidder and width, and lay the foundation pit. If it is a concrete foundation, mix the concrete at the concrete mixing station according to the approved construction mixing ratio, and transport it to the construction site by concrete truck.
After slurrying the concrete foundation, the gabion net is manually pulled on the surface and sprinkled with water to protect the assembly of the cage unit. The binding requirements are: the four corners of the gabion net and the net body, each tied together, with a spiral The combination wire is used to fasten the connection between the end screen frame wire and the mesh body to tighten the connection, and at the junction of the mesh body, twist the helical combination wire to tighten and fix it.
To connect each rack unit, the binding requirements are: the upper and lower corners of the adjacent gabion nets are provided with a combination of bindings, and in the space of the adjacent cages, the binding wires are combined at the top and bottom, and the mesh is bonded There are two combination lines per square meter, adjacent frame lines and folding lines, and the folding lines are bound with double strands every 20 cm.
Filling the cage with stones, using manual or mechanical filling, fills the grid instantly. Tamp it with a wooden or iron rod, and then fill the gap with crushed small stones. The filler on the exposed surface should be paved by hand, flat and beautiful. Cover the cage. When the stone filling height in the gabion mesh cage meets the design requirements, and the technical specifications of the stone filling also meet the design requirements, cover the gabion net, and the binding requirements are the same as the steps.
key word:
Gebin net
Related news
2022-12-13
Online Message
Quick Nav
Contact Us
Address: No. A7-02, Huafu Street, Raoyang Economic Development Zone, Hebei Province
Tel: 18831889815 (Manager Xu)
Web: www.gebin1688.cn
Mail: 772458770@qq.com