Processing method and use mode of lead wire gabion
Published:
2020-11-18
The main processing method of lead wire gabion is very simple. In general, its use method is consistent with the idea of playing with building blocks when we were young. In ancient China, most of the lead wire gabion we used was square or regular rectangular shape. We can decide the specific volume according to the actual needs of the construction site
The main processing method of lead wire gabion is very simple, Under normal circumstances, its use method is consistent with our idea of playing with building blocks when we were young. In ancient China, most of the lead wire gabions we used were square or regular rectangular shapes, and we can decide the specific volume according to the actual needs of the construction site.
The main processing flow of lead wire gabion is grid compilation, mesh shape, filling with fillers, processing and forming. When doing it, the first step is grid compilation, which is very important and determines the quality of lead wire cage, so we should pay special attention to it when selecting materials. With the progress of human civilization, the material selection is becoming more and more optimized and reasonable. For example, galvanizing on iron wire can reduce the progress of long-term contact oxidation between lead wire cage and water and prolong the service life of grid. In addition, when making lead wire gabion, it is necessary to consider the size of grid spacing between lead wire gabion.
In general, the smaller the spacing between the lead wire gabion, the more firm the lead wire gabion, but the spacing between the lead wire gabion can not be too small, because the building materials and the use time of the lead wire gabion limit the use conditions of the lead wire gabion in general, so many factors need to be considered, and the spacing cannot be excessively compressed.
Mesh laying refers to laying the mesh that has been compiled in advance on the ground, Then, according to the designed size of the lead wire gabion, Fold the four sides of the grid into the required rectangular shape. Filling the wire cage with fillers only means filling the lead wire cage with Stone or gravel. However, the quality must be considered to avoid the littering of Stone. Of course, other fillers can also be used to fill, but it is also necessary to ensure that the fillers are in good order. The last step is the reinforcement of the lead wire cage. Under normal circumstances, it can be used only after each side of the lead wire gabion is bound with iron wire.
key word:
Lead wire gabion
Related news
2022-12-13
Online Message
Quick Nav
Contact Us
Address: No. A7-02, Huafu Street, Raoyang Economic Development Zone, Hebei Province
Tel: 18831889815 (Manager Xu)
Web: www.gebin1688.cn
Mail: 772458770@qq.com