Processing method of lead wire gabion
Published:
2020-11-06
The main processing flow of the lead wire gabion is grid preparation, mesh shape, filling with fillers, and processing. When doing it, the first step is to prepare the grid. This step is very important. It determines the quality of the lead wire gabion. The quality is good or bad. Therefore, special attention should be paid to the selection of materials. With the progress of human civilization, the selection of materials is becoming more and more optimized and reasonable. For example, the progress of lead wire gabion in contact with water for a long time can be reduced by galvanizing the iron wire, and the grid can be extended. In addition, it is necessary to consider the size of the grid spacing of the lead wire gabion when making the lead wire gabion.
The main processing flow of lead wire gabion is grid compiling mesh shape filling with filler processing molding. When doing, the first step is to compile grid, which is very important. It determines the quality of lead wire gabion So we should pay more attention to the selection of materials. With the progress of human civilization, the selection of materials is becoming more and more optimized and reasonable. For example, we can reduce the progress of long-term contact oxidation between lead wire gabion and water by galvanizing iron wire, and prolong the service life of grid. In addition, we need to consider the size of grid spacing between lead wire gabion when making lead wire gabion In general, the smaller the spacing between the lead wire gabion, the stronger the lead wire gabion, but the spacing between the lead wire gabion should not be too small because of the building materials and the use time of the lead wire gabion. The use conditions of the lead wire gabion are limited in general. Therefore, many factors need to be considered and the spacing should not be excessively compressed Mesh laying refers to laying the pre-prepared grid on the ground, then folding the four sides of the grid into the required rectangular shape according to the designed size of the lead wire gabion and filling the wire cage with fillers. It only refers to filling the lead wire gabion with Stone or gravel, but the quality must be considered to avoid littering and abandonment of Stone Of course, it can also be filled with other fillers, but it is also necessary to ensure that the fillers are in order. The last step is to reinforce the lead wire gabion In general, it is only necessary to bind each side of the lead wire gabion with iron wire respectively and then it can be used
key word:
铅丝石笼
next
next：
Related news
2022-12-13
Online Message
Quick Nav
Contact Us
Address: No. A7-02, Huafu Street, Raoyang Economic Development Zone, Hebei Province
Tel: 18831889815 (Manager Xu)
Web: www.gebin1688.cn
Mail: 772458770@qq.com