River flood control gabion cage reinforcement of river flood discharge and drainage
Published:
2019-12-12
Gold Coast Road and Bridge Engineering Co., Ltd. Gebin Net Factory focuses on Gebin Net industry for 20 years. Its main products are Gebin Net, Lead Wire Cage, Reinforced Mike Pad, Alloy Net Pocket, Gabion Net and Gebin Net Pad
The production process of the gabion cage:
The machine weaves the net in the form of double winding three twists/five twists→
Manual/machine cutting of the mesh according to the specifications required by the drawings→
Manual/machine seaming of each mesh →
Connect the side panels, front and rear panels, and partitions of the cage that have been locked to the bottom of the cage (install a partition for each one meter in the middle)→
Then fold the semi-finished gabion cage to reduce the occupied area→
Dozens of folded gabion cages are sent to the compressor for compression and then fastened with binding wire→
to be delivered.
(Of course, many links have to pass the quality inspection before entering the next link)
(1) Gabion cage aperture: 60*80mm, 80*100mm, 80*120mm, 100*120mm, 120*150mm
The length of the twisted part of the double wires shall not be less than 50mm to ensure that the gold and PVC coatings of the steel wires in the twisted part are not damaged.
(2) Gabion cage wire diameter: Gabion nets are divided into three wire diameters—mesh wire, edge wire, and binding wire
1. The range of mesh is 2mm-4mm
2. The edge wire is generally larger than the mesh wire, 0.5mm-1mm thick
3. The binding wire is generally smaller than the mesh wire, and the common one is 2.2mm
(3) Steel wire tension: not less than 38kg/m2 380N/mm
(4) Surface treatment of gabion cages
1. Galvanized. The highest zinc content is 10g/m2. Poor corrosion resistance
2. Hot-dip galvanizing. The highest amount of zinc can reach 300g/m2. Strong corrosion resistance
3. Galvan (zinc aluminum alloy). This is divided into two materials, zinc-5% aluminum-mixed rare earth alloy steel wire, zinc-10% aluminum mixed rare earth alloy steel wire. Super anti-corrosion
4. PVC plastic wrap. The thickness of the plastic wrap is generally 1.0mm, for example: 2.7mm is 3.7mm after wrapping. Strong anti-corrosion
(5) Gabion cage size: customized
Cage model: 1-4m long, 1-2m wide, 0.4-1m high, 1-3 mesh intervals
Mesh pad model: 3-6m long, 2m wide, 0.2-0.3m high, 2-5 meshes
The machine weaves the net in the form of double winding three twists/five twists→
Manual/machine cutting of the mesh according to the specifications required by the drawings→
Manual/machine seaming of each mesh →
Connect the side panels, front and rear panels, and partitions of the cage that have been locked to the bottom of the cage (install a partition for each one meter in the middle)→
Then fold the semi-finished gabion cage to reduce the occupied area→
Dozens of folded gabion cages are sent to the compressor for compression and then fastened with binding wire→
to be delivered.
(Of course, many links have to pass the quality inspection before entering the next link)
(1) Gabion cage aperture: 60*80mm, 80*100mm, 80*120mm, 100*120mm, 120*150mm
The length of the twisted part of the double wires shall not be less than 50mm to ensure that the gold and PVC coatings of the steel wires in the twisted part are not damaged.
(2) Gabion cage wire diameter: Gabion nets are divided into three wire diameters—mesh wire, edge wire, and binding wire
1. The range of mesh is 2mm-4mm
2. The edge wire is generally larger than the mesh wire, 0.5mm-1mm thick
3. The binding wire is generally smaller than the mesh wire, and the common one is 2.2mm
(3) Steel wire tension: not less than 38kg/m2 380N/mm
(4) Surface treatment of gabion cages
1. Galvanized. The highest zinc content is 10g/m2. Poor corrosion resistance
2. Hot-dip galvanizing. The highest amount of zinc can reach 300g/m2. Strong corrosion resistance
3. Galvan (zinc aluminum alloy). This is divided into two materials, zinc-5% aluminum-mixed rare earth alloy steel wire, zinc-10% aluminum mixed rare earth alloy steel wire. Super anti-corrosion
4. PVC plastic wrap. The thickness of the plastic wrap is generally 1.0mm, for example: 2.7mm is 3.7mm after wrapping. Strong anti-corrosion
(5) Gabion cage size: customized
Cage model: 1-4m long, 1-2m wide, 0.4-1m high, 1-3 mesh intervals
Mesh pad model: 3-6m long, 2m wide, 0.2-0.3m high, 2-5 meshes
key word:
Related news
2022-12-13
Online Message
Quick Nav
Contact Us
Address: No. A7-02, Huafu Street, Raoyang Economic Development Zone, Hebei Province
Tel: 18831889815 (Manager Xu)
Web: www.gebin1688.cn
Mail: 772458770@qq.com